RSS Feed

Posts Tagged ‘lathe’

  1. Presto Recorder 1937 vinyl record lathe

    August 1, 2019 by admin

    Presto-Recorder-1937-vinyl-record-lathe-01-yj Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 vinyl record lathe

    Presto Recorder 1937 vinyl record lathe
    Presto Recorder 1937 J-5 vinyl record lathe. Item is listed As-Is, not working, not tested, for parts or repair. That said, you can see it working listed As Is, not working. Not tested in this video cutting vinyl 78 RPM live in real time no editing, In the video you can see the VU meter working in unison with the live guitar playing, using the original microphone. You also can see the record lathe head cutting grooves into the vinyl and see the string of vinyl being pulled off during cutting, check it out here… The play back can be seen here, A few things to mention, playback is on a crappy cheap portable phonograph turntable, the only turntable I had that could play 78’s. Also using the original microphone, a modern microphone would be better sound quality. Anyway, check it out here.. This unit comes with a copy of the owners manual which details the vacuum tubes. The unit comes with all new vacuum tubes installed. The unit comes with a brand new needle/never used. Also included are 3 pvc record blanks. The motor works listed As Is, not working. Not tested and has original rubber drive belt. If you know anything about these type of old machines or new to them, their volume and tone control knobs need to be cleaned, an investment into “amplifier pot spray” and use will enhance the sound quality, be sure to turn knobs whiles spraying. The Presto K-6 was used to record the Hindenberg Disaster, These units were what was used to record anything before Reel to Reel tape – these units are very rare vinyl recorders. The item “Presto Recorder 1937 vinyl record lathe” is in sale since Sunday, January 20, 2019. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Phonographs, Accessories\Other Phonographs”. The seller is “reid5058″ and is located in Pacifica, California. This item can be shipped to United States.
    • Modified Item: No
    • Country/Region of Manufacture: United States

    Presto Recorder 1937 vinyl record lathe

  2. Fairchild Westrex stereo vinyl record cutting cutter lathe turnkey system

    July 6, 2019 by admin

    Fairchild-Westrex-stereo-vinyl-record-cutting-cutter-lathe-turnkey-system-01-rq Fairchild Westrex stereo vinyl record cutting cutter lathe turnkey system

    Fairchild Westrex stereo vinyl record cutting cutter lathe turnkey system
    Fairchild Westex vinyl lacquer stereo cutting lathe system. Includes Westrex 3D stereo head, matching 1700 cutting amps and modified Technics MKIII table with vacuum platter – plus one day hands on demonstration and continuous help afterwards. Investment payback within a year or two for sure. GREAT PROFESSIONAL STEREO SOUND! The item “Fairchild Westrex stereo vinyl record cutting cutter lathe turnkey system” is in sale since Sunday, June 9, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Vintage Pro Audio Equipment”. The seller is “customrecords” and is located in Minneapolis, Minnesota. This item can be shipped worldwide.
    Fairchild Westrex stereo vinyl record cutting cutter lathe turnkey system

    Incoming search terms:

    • fairchild vinyl lathe for sale

  3. Presto K8 K-8 record cutting lathe, vinyl recorder

    May 28, 2019 by admin

    Presto-K8-K-8-record-cutting-lathe-vinyl-recorder-01-jzs Presto K8 K-8 record cutting lathe, vinyl recorder
    Presto K8 K-8 record cutting lathe, vinyl recorder
    Presto K8 K-8 record cutting lathe, vinyl recorder
    Presto K8 K-8 record cutting lathe, vinyl recorder

    Presto K8 K-8 record cutting lathe, vinyl recorder
    You’re looking at vintage Presto K-8 record cutting lathe from 1940s. Powers on, pilot light on. Motor spins when engaged, platter spins quietly. Recording/playing amp complete – works, cutterhead works, head moving system works. Please note that the unit is HEAVY! I have few more lathes from my collection that I can list here (2x Prestko K8, Presto K7, Federal Recorder). The item “Presto K8 K-8 record cutting lathe, vinyl recorder” is in sale since Tuesday, January 22, 2019. This item is in the category “Sound & Vision\Vintage Sound & Vision\Record Players/Turntables”. The seller is “sat159p1″ and is located in Wroclaw. This item can be shipped worldwide.
    • Model: K8
    • Brand: Presto

    Presto K8 K-8 record cutting lathe, vinyl recorder

  4. Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    August 1, 2018 by admin

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    This is a used, antique karaoke record lathe enclosed in a custom case with lock. It supports Atom lathe type styluses. It comes with an installed sapphire stylus, an original replacement sapphire stylus, and 5 new diamond styluses for cutting PVC dub plates. Also included are 10 PVC dub plates, and a power cable. All you need is a heat lamp (though this does have a heating wire) and a power converter and you can cut your own mono records. Obviously this is an older unit and limited to only mono, that being said if you are looking for something to learn how to build your own lathe, or appreciate older sounding records, this does work. This was bought a couple years ago, below is the original description (note the video link still works and demonstrates the functioning unit). HARA M-180 Vinyl Record Lathe – Made in Japan (AKA Atom Vanrock). A rare chance to own one of these legendary. A 7 45 rpm record lathe in great working condition. Check the video I made below – This is the actual machine! You can control input level (mono) or mic level and groove width. This unit can cut PVC, Polycarbonate, lacquers, even CD’s with the correct stylus. Arrives with the original sapphire stylus. When bought it I managed to cut a track on a lacquer successfully and it has been in storage ever since. Comes in a beautiful suitcase, with the original key! Power turns on, platter turns, lathe moves forward, guide light works, input + VU meter works, cutter head receiving signal. I tested all elements and it’s all looking good – Check video! I don’t have an empty lacquer to cut.. Don’t miss out, these don’t come around too often! Weighs 7.5 KG. Similar to Presto, Vinylium, Grampian, Vinylrecorder, Fairchild, Vestax VRX 2000, A-101, E-101, E101. The item “Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock” is in sale since Thursday, July 26, 2018. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Phonographs, Accessories\Other Phonographs”. The seller is “perplexitude” and is located in Tiffin, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.
    • Country/Region of Manufacture: Japan

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    Incoming search terms:

    • hara recorder

  5. Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder

    May 30, 2018 by admin

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Wir verkaufen hier im Auftrag eines Bekannten ein Vinyl Cutter aus den 1980er Jahren. Die Ware ist gebraucht und wird als defekt verkauft. Achtung das Gerät hat 100V Stromversorgung (ob es sich intern umstellen lässt, ist nicht bekannt). Adapter gibt es als Stepdown Adapter z. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. The item “Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder” is in sale since Sunday, February 18, 2018. This item is in the category “TV, Video & Audio\TV-, Video- & Audio-Raritäten\Sonstige”. The seller is “massensender” and is located in Wilhelmshaven. This item can be shipped worldwide.
    • Country/Region of Manufacture: Japan
    • Herstellungsland und -region: Japan

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder

  6. Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)

    April 19, 2018 by admin

    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)
    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)
    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)
    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)
    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)

    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)
    Wir verkaufen hier im Auftrag eines Bekannten ein Vinyl Cutter aus den 2000er Jahren. Die Ware ist gebraucht und wird als defekt verkauft. Achtung das Gerät hat 100V Stromversorgung (ob es sich intern umstellen lässt, ist nicht bekannt). Adapter gibt es als Stepdown Adapter z. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. Die Ware wird in einer Holzkiste versandt. Mach uns doch ein Angebot über alle drei Record Cutter. The item “Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)” is in sale since Sunday, February 18, 2018. This item is in the category “Musikinstrumente\Pro-Audio Equipment\Sonstige”. The seller is “massensender” and is located in Wilhelmshaven. This item can be shipped worldwide.
    Vestax VRX-2000 record cutting cutter DJ turntable lathe vinyl (presto neumann)

  7. Manley Vinyl Record Cutting Lathe Complete shipping available

    March 19, 2016 by admin

    Manley Vinyl Record Cutting Lathe Complete shipping available

    Manley Vinyl Record Cutting Lathe Complete shipping available
    All of the components are in perfect working order and have been meticulously maintained. The record cutting lathe was designed by Manley Labs, USA. It is arguably the finest record cutting system ever built. The lathe is comprised of the best components of Scully & Neumann. The base is a Scully base which is considered far superior to the Neumann base. The lathe is capable of half-speed mastering. It has a Technics SP-02 Drive Motor, Neumann 30lb Vacuum platter, Neumann Drop Box, and highly modified Westrex Head that fits a Neumann stylus. The preamps are a one-of-a-kind Manley Labs design known as Vanimal 1 and 2, with RIAA encoding switchable in or out for testing and cutting 78 rpm masters. It has cutting speeds of 16, 22.5, 33, 45, and 78rpm, with a pitch adjustment of +-10%. This Lathe will cut a 16 master laquer. The drive motor is a Technics SP-02 drive motor and is considered the most highly desired cutting motor. The power amplifiers are Manley Labs monoblocks with custom output transformers. The lathe also come with an Ortofon CPS-741 correction amplifier. The system comes with a fully operational Capps cutting computer. The lathe table is a custom built 4 laminate construction with air dampers for isolation of the base from the cutting table. 2 heavy gauge square steel tubing specifically designed for stability comprises the base. The preamps and power amplifiers were recently gone thru, and work flawlessly. Please contact if you need more info or pictures. The item “Manley Vinyl Record Cutting Lathe Complete shipping available” is in sale since Tuesday, March 15, 2016. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Record Players”. The seller is “lagos-gonza” and is located in Aracena. This item can be shipped worldwide.
    Manley Vinyl Record Cutting Lathe Complete shipping available