RSS Feed

Posts Tagged ‘atom’

  1. Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE

    September 13, 2021 by admin

    Vanrock-E-101-Vinyl-Record-cutting-Lathe-machine-AKA-Atom-A-101-LOOK-YOUTUBE-01-bkj Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE

    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE
    Size: 390 mm x 350 mm x 210 mm. Operation status at the time of check. VU meter lights up. 45 rotation, 33 rotation switching switch operation (exact rotation speed unknown). “STANDING” Turntable moves to the right and stops at the position where the cutting needle rides. FORWARD Turntable moves to the right while rotating. “RECORDING” The speed slows down and moves slowly to the right. “ENDING” The speed of right movement becomes faster, it stops at the label part, the turntable rotates. “STOP” turntable rotation stopped. When I put the sound source in the MIC input and raised the volume manually, the cutting needle vibrated. The VU meter is lit, but the needle stopped at the center position and did not respond to the sound source. Since there is no shavings at the bottom of the turntable. I think it was rarely used. Accessories are a power cord, shield, microphone, and microphone holder. All of them are almost unused. Includes 1 assembly method, 4 precautions, and 10 pages of instruction manuals (Japanese). The case has scratches, dirt, rust, dents, etc. The main body I personally think that it is in a fair condition. If you want more information, please leave a message. Probably more than 40 years old. [International Buyers – Please Note]. We do not mark merchandise values below value or mark items as “gifts” – US and. International government regulations prohibit such behavior. Thanks for seeing my page. The item “Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE” is in sale since Thursday, August 5, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Record Players”. The seller is “jb.goods83″ and is located in Toyonaka. This item can be shipped worldwide.
    • Model: E-101
    • Country/Region of Manufacture: Japan
    • Brand: Ogi Electronics

    Vanrock E-101 Vinyl Record cutting Lathe machine AKA Atom A-101 LOOK YOUTUBE

    Incoming search terms:

    • vinyl record lathe
    • https://recordrecords org/tag/vanrock/
    • record lathe vinil

  2. SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl

    January 9, 2021 by admin

    SHIPPING-TO-THE-US-NOW-Vanrock-Atom-E101-Record-Cutting-Lathe-Vinyl-01-wcx SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl
    SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl
    SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl

    SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl
    Vanrock E101 Portable Record cutting machine, I have used it for the past two years and made many records for small bands. It is fully functional, I replaced the belts with new ones not long ago. It comes with a new diamond stylus I bought a year ago. A second diamond stylus comes with it, the original that came with the machine. European buyers will get a power converter 220V – 100V. Included are a few blank records. The item “SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl” is in sale since Wednesday, October 7, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Record Players”. The seller is “music_1915″ and is located in Koprivnica, koprivnicko-krizevacka. This item can be shipped to North, South, or Latin America, all countries in Europe.
    SHIPPING TO THE US NOW! Vanrock Atom E101 Record Cutting Lathe Vinyl

  3. Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom

    May 10, 2020 by admin

    Nissei-KS-7000-Disk-Recorder-Japan-Vinyl-Cutter-Maschine-Vanrock-Atom-01-vme Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom

    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom
    Ill pack it well, I will make an air cushion so that the mechanic does not suffer! This machine for recording in very good working condition, cuts and cramps! Cosmetically in good condition, see the photo! This lathe cuts 7-inch workpieces at 33 or 45 rpm. You can control the input levels of the line or microphone (mono), there is an option of automatic alignment with a compressor that controls the input level. You can fine tune the speed of the disk 33 and 45 (in this unit there is a mark that I adjusted the correct speed). Japanese lathe for the production of vinyl discs 80-, lmost identical to Japanese machines (Atom A-101 and Vanrock E-101). This machine is checked and restored, motor belts replaced, mechanical japan grease! Cutting records on black vinyl, polycarbonate and other plastics! Power Supply AC 100V. Three polycarbonate blanks are best cut without a rubber mat, as they are thick! Before recording, its very effective to use turtle wax fresh shine, car spray for plastic! I installed the stylus on the disk manually and not as indicated in the manual, as it seems to me that there was not enough weight. I found a translated manual in English in the community (Lathetrolls) and I will send it to you electronically! You will need to make a calibrated adjustment with respect to the weight of the cutting head for stylus needle! The item “Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom” is in sale since Thursday, April 9, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Other Vintage Audio & Video”. The seller is “puarq” and is located in Moscow. This item can be shipped worldwide.
    Nissei KS-7000 Disk Recorder / Japan Vinyl Cutter Maschine / Vanrock Atom

  4. Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter

    October 21, 2019 by admin

    Vanrock-Atom-Hara-Harara-Style-Japanese-7-Record-Vinyl-Lathe-Cutter-01-mwdq Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter
    Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter

    Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter
    Currently running embossing cones on Makrolon 7 Blanks. Excellent little lathe to get you started. Its a vanrock/atom style cutter.. I think its a hara or harara?? Lathe but not entirely sure. Comes with 1 blank and 4 brand new embossing cones. Any questions please ask. The item “Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter” is in sale since Thursday, October 17, 2019. This item is in the category “Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Record Players”. The seller is “pandapolar11″ and is located in Darra, Queensland. This item can be shipped worldwide.
    Vanrock / Atom / Hara / Harara Style Japanese 7 Record Vinyl Lathe Cutter

    Incoming search terms:

    • https://recordrecords org/2019/10/vanrock-atom-hara-harara-style-japanese-7-record-vinyl-lathe-cutter/

  5. Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    August 1, 2018 by admin

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock
    This is a used, antique karaoke record lathe enclosed in a custom case with lock. It supports Atom lathe type styluses. It comes with an installed sapphire stylus, an original replacement sapphire stylus, and 5 new diamond styluses for cutting PVC dub plates. Also included are 10 PVC dub plates, and a power cable. All you need is a heat lamp (though this does have a heating wire) and a power converter and you can cut your own mono records. Obviously this is an older unit and limited to only mono, that being said if you are looking for something to learn how to build your own lathe, or appreciate older sounding records, this does work. This was bought a couple years ago, below is the original description (note the video link still works and demonstrates the functioning unit). HARA M-180 Vinyl Record Lathe – Made in Japan (AKA Atom Vanrock). A rare chance to own one of these legendary. A 7 45 rpm record lathe in great working condition. Check the video I made below – This is the actual machine! You can control input level (mono) or mic level and groove width. This unit can cut PVC, Polycarbonate, lacquers, even CD’s with the correct stylus. Arrives with the original sapphire stylus. When bought it I managed to cut a track on a lacquer successfully and it has been in storage ever since. Comes in a beautiful suitcase, with the original key! Power turns on, platter turns, lathe moves forward, guide light works, input + VU meter works, cutter head receiving signal. I tested all elements and it’s all looking good – Check video! I don’t have an empty lacquer to cut.. Don’t miss out, these don’t come around too often! Weighs 7.5 KG. Similar to Presto, Vinylium, Grampian, Vinylrecorder, Fairchild, Vestax VRX 2000, A-101, E-101, E101. The item “Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock” is in sale since Thursday, July 26, 2018. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Phonographs, Accessories\Other Phonographs”. The seller is “perplexitude” and is located in Tiffin, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.
    • Country/Region of Manufacture: Japan

    Rare Hara Disk Recorder M-180 Vinyl Mono Record Cutter Lathe Atom Vanrock

    Incoming search terms:

    • hara recorder

  6. Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder

    May 30, 2018 by admin

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder
    Wir verkaufen hier im Auftrag eines Bekannten ein Vinyl Cutter aus den 1980er Jahren. Die Ware ist gebraucht und wird als defekt verkauft. Achtung das Gerät hat 100V Stromversorgung (ob es sich intern umstellen lässt, ist nicht bekannt). Adapter gibt es als Stepdown Adapter z. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. The item “Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder” is in sale since Sunday, February 18, 2018. This item is in the category “TV, Video & Audio\TV-, Video- & Audio-Raritäten\Sonstige”. The seller is “massensender” and is located in Wilhelmshaven. This item can be shipped worldwide.
    • Country/Region of Manufacture: Japan
    • Herstellungsland und -region: Japan

    Record cutting machine Lathe Atom A-101 / Vanrock E-101 Vinyl recorder